Type N Connectors

The N connector is a threaded, weatherproof, medium-size RF connector used to connect cables or to connect to antennas,  The N connectors listed here are 50 Ω impedance.

  • N Female EZ Crimp Connector for LMR-400, Group I

    This is Times' EZ series of connectors. The center pin is captive, and has a crimp outer ring only needing a .429 hex crimp to attach this connector. Silver body, Gold center pin. Times part number EZ-400-NF-X - complete with heat shrink to finish a professional installation. Not designed for Ultraflex cable.

    • $16.33
  • Silver 4 Hole N-Female Panel Mount

    N Female Connector, 4-Hole Panel Mount, Solder Termination, Silver Plated

    • $5.00
  • N Male Crimp Connector for LMR 100 and RFC100 Group B

    Standard N male connectors for use with LMR-100, RFC100, RG-316 or RG-174 Coax cable. They are used for a wide variety of connections to terminate coax at a N female jack. The body plating is Nickel, the center pin is Gold and the dielectric is Teflon. Center pin attachment is a crimp type (.100 crimp) , and outer ring is crimp (.130 crimp tool needed).



    • $7.50
  • N Male Crimp Connector for LMR 195 and RFC195 Group C

    Standard N male connectors for use with LMR-195, RFC-195 or RG-58 Coax cable. They are used for a wide variety of connections to terminate coax at a N female jack. The body plating is Silver, the center pin is Gold and the dielectric is Teflon. Center pin attachment is a crimp type (.100 crimp) , and outer ring is crimp (.213 crimp tool needed).

    • $5.00
  • N Male Crimp Connector for LMR 240 and RFC240 Group X

    Standard N male connectors for use with LMR-240, RFC240 or RG-8/X Coax cable. They are used for a wide variety of connections to terminate coax at a N female jack. The body plating is Silver, the center pin is Gold and the dielectric is Teflon. Center pin attachment is a crimp type (.068 crimp) , and outer ring is crimp (.255 crimp tool needed).



    • $3.44
  • N Male Crimp Connector LMR 400, RFC400 and Group I Coax

    Standard N male connectors for use with LMR-400, RFC400, RG-8/U or Belden 9913 Coax cable. They are used for a wide variety of connections to terminate coax at a N Female jack. These are the most common connector for ISM antennas sold. The body plating is Silver, the center pin is Gold and the dielectric is Teflon. Center pin attachment is crimp (.128 die) or solder type, and outer ring is crimp (.429 crimp tool needed).



    • $5.00
  • Times Microwave N Male Crimp EZ Connector for LMR 400 Group I

    Genuine Times Microwave EZ series connector. This N Male fitting features a captivated center pin. To attach to coax all that is needed is a standard .429 hex crimp tool. Silver body, gold center pin - Times part # EZ-400-NMH-X - comes complete with heat shrink for a complete professional installation. Not designed for Ultraflex cable.



    • $20.69
  • N Male Crimp Connector for LMR 600, RFC600, Group L2 Coax

    Standard N male connectors for use with LMR-600 Coax cable. They are used for a wide variety of connections to terminate coax at a N Female jack. These are the most common connector for ISM antennas sold. The body plating is Silver, the center pin is Gold and the dielectric is Teflon. Center pin attachment is crimp type, though we recommend the pin to be soldered, and outer ring is crimp. Piston crimp tool with .610 die required for connector.



    • $8.30
  • Times Microwave N Male Crimp EZ Connector for LMR 600 Group L2

    Genuine Times Microwave N Male connector for 1/2" LMR-600 foam dielectric cable. Captivated pin. No soldering needed. Hex coupling nut. Crimp on braid. Not designed for Ultraflex cable.

    • $30.00
  • N Female Crimp Connector for LMR 100, RFC100, Group B Coax

    Standard N female connectors for use with LMR-100, RFC100, RG-316 or RG-174 Coax cable. They are used for a wide variety of connections to terminate coax at a N male jack. The body plating is Nickel, the center pin is Gold and the dielectric is Teflon. Center pin attachment is a crimp type (.100 crimp) , and outer ring is crimp (.130 crimp tool needed). 

    • $8.00
  • N Female Bulkhead Connector for LMR-100, RFC100 and Group B Coax

    Bulkhead N female connectors for use with LMR-100, RFC100, RG-316 or RG-174 Coax cable. They are used for a wide variety of connections to terminate coax at a N male jack. The body plating is Nickel, the center pin is Gold and the dielectric is Teflon. 

    • $12.00
  • N Female Crimp Connector for LMR 195, RFC194, Group C Coax

    Standard N female connectors for use with LMR-195, RFC195 or RG-58 Coax cable. They are used for a wide variety of connections to terminate coax at a N male jack. The body plating is Nickel, the center pin is Gold and the dielectric is Teflon. Center pin attachment is a crimp type (.100 crimp) , and outer ring is crimp (.213 crimp tool needed). 

    • $3.40
Products: 112 of 18

Footer navigation